- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
高温绝缘电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:石墨电极电阻率测试仪
-
210-炭块电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
121A1-热刺激电流测...
-
121B-全自动电阻率测...
-
高低温绝缘电阻率测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
- 粉末测试设备
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高输出功率小直流电测试仪(耐电弧放电测试仪)-(估算机操控)
High voltage low current tester (arc resistance tester) - (computer control)
新产简称称:耐电弧试验机
Product name: electric arc resistance tester
产品设备类型:NDH-A
Product model: NDH - A
要求标淮:GB/T 1411-2002《固状绝缘层食材耐高压得很低瞬时电流电弧蓄电池放电蓄电池放电的检测》(相等IEC 61621-1997)及ASTM D495等规定的追求设计的概念研制的,并合乎IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
最主要的使用区间及性能:
本做实验的时候机是采用运应用于电机马达、小型电器开关和小型小型电器开关等服务行业的电工维修用泡沫塑料管、硅橡胶胶和隔热带漆等隔热带相关装修材料的耐焊弧能评选,主应用于物质隔热带相关装修材料如:泡沫塑料管、膜、硅橡胶、云母片、陶瓷厂家、破璃、隔热带油、隔热带漆、纸壳等物质的耐焊弧能检查;
本检验机由核算机操纵正常运行,需要信息显示眼下工作测试形态及测试时,测试终结后并存有眼下工作测试数值,并可打印机.标准规范科学试验计划书。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 机器为横竖集成结构类型,顶部为运营设备,顶部为疲劳湿热。
2 本成品进行*新智慧把控技术工艺,利用选定软件程序(IEC或ASTM)可定时使用检测,并在PC上提示测试步骤和结局。
3 **性能参数好的,抗干拢专业能力强,测试图片定位精更高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 焊弧通断准确时间随机误差:少于 ±10ms
2 调压器存储量:2kVA
3 额定的冲击试验电压电流:12.5kV
4 检验直流电压误差:±3%
5 电流大小调控导致精度:±10% 电流量在线测量的精密度:1.5%
6 电极片对样品工作压力:(0.5±0.05)N
7 探针产品:钨棒
8 参比电极远距离:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 施用环镜摄氏度:(23±2)℃
10 操作环镜温度:(50±5)%
11 外接电源:220V±5% 50Hz
12 耐压试验 做法: 国家标准下载/美标/10 mA 不间断/20 mA 多次/30 mA间隔/40 mA累计
13 试验台程序代码方式:
| 编译程序段 | 焊弧交流电 mA | 电弧放电通断时期s | 各小程序段继续日期s | 疲劳试验总时候s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 持续通 | 60 | 240 | |
| 5 | 20 | 持续通 | 60 | 300 | |
| 6 | 30 | 接连通 | 60 | 360 | |
| 7 | 40 | 连续不断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 项目编号 | 名稱 | 总量 | 备注名称 |
| 01 | 耐电弧焊接测式仪 | 一个 | |
| 02 | 电极片系统性 | 有一套 | |
| 03 | 金属电极网架支座 | 一款 | |
| 04 | 电源模块通信电缆 | 买套 | |
| 05 | 接地系统放** | 一部 | |
| 06 | 直流电毫安表 | 买台 | |
| 07 | 我的电脑测控游戏 | 一套套 | |
| 08 | 试件材料架 | 一个 | |
| 09 | 探针高度标准的块 | 2块 | |
| 10 | 角度来标准化块 | 2块 | |
| 11 | 瓷质片 | 2片 | |
| 12 | 喷墨网页佳能打印机 | 1台 | 品牌标志 |
| 13 | 计算出来机 | 1台 | 知名品牌 |
| 14 | 运行解释书 | 1份 | |
| 15 | 通过率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 厂品规格型号:
NDH-A 耐电孤冲击试验仪-微机保持
NDH-B 耐弧光检测仪-触模屏有效控制
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!